Jack-in-a-Box Camper Slide-Out Support Set # JB-20 was designed to support slide outs. What you are looking for is a truck bed camper jack. We have several, see link, ranging from 1,000 to 4,000 pounds capacity and max lift height from 57 to 67 inches.
The highest capacity models are # CXHD and # CX74 at 4,000 pounds at 57 or 67 inches lift height, respectively. view full answer...
From your description, it sounds like you need a stabilizer jack like the Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2 # 288-01892-2. These jacks are able to be out of the way when not needed and then add 1000 lb capacity support when needed and up to 650 lbs of lift. This will give you the support and stability you desire for loading and unloading.
If you need more support then I recommend the Ultra-Fab Ultra Scissor Jacks - 30" Lift - 6,500 lbs - Qty 2 # UF48-979031.... view full answer...
The Powerbuilt Unijack Bottle Jack with Built-In Jack Stand - 21" Lift - 6,000 lbs # ALL620471 is the solution for both of your questions. You should use two of these to lift your ATV level. The scissor jacks for RV's are only support jacks and not intended for lifting at all. That will also allow you to hold the axle up to that 21 inches high.
This jack is also heavy duty enough to help you lift up an axle on your triple axle toy hauler to change the tire. view full answer...
For the stabilization you are seeking, I recommend the Ultra-Fab Power Twin II Manual Stabilizer for Trailers and RVs - 30" Lift - 6,000 lbs # UF39-941704 or the Lippert Components High-Speed Power Stabilizer Jack - 30" Lift # LC298707. These will be superior to 4 independent stabilizer jacks and most likely have more lifting height.
The recommended stabilizer jacks will give you cross frame support so you will have the frame support from both sides as you drive your vehicle on and off... view full answer...
Since SumoSprings doesn't offer a great solution for lifted trucks I'd rather recommend a different suspension enhancement for your 2019 Ford F-150 that has a lift with the RoadActive Suspension Kit # RAS3611-YHD which is not affected by lift kits based on how it installs and actually provides the best support, ride quality, and stability so wins in all categories. Other options will give you the support but you'll sacrifice ride quality but with this you get the support and improved loaded... view full answer...
For your 2010 Ford F150 4WD you would want the Air Lift Ride Control Air Helper Springs # AL59568 that you referenced. This would be a great system to provide you with additional rear suspension support when towing your gooseneck trailer.
I attached an install video for this system for you to check out as well. view full answer...
I do have an air bag option available for your 2023 GMC Sierra 1500 with adaptive suspension in the Firestone Ride-Rite Air Helper Springs part # F2609 but there are no options from Air Lift. These are an excellent option that will help with rear end support when towing or hauling and they are adjustable so you can always get the perfect match between support and comfort. The great thing about Firestone air bags when compared to Air Lift air bags is that you can lift the vehicle by the... view full answer...
Most vehicle suspension is progressively rated like what you mentioned. That means that the further the suspension compresses the stiffer the suspension becomes to bettery suit heavy loads. That said air suspension enhancement like the Air Lift kit part # AL57577 will still provide more support that will be helpful. It helps support the suspension when needed to provide you with the best possible towing experience.
What's great about air bags is that when needed you can inflate them to... view full answer...
For your 2017 Ram 1500 with the 4" body lift I recommend the SumoSprings Solo Custom Helper Springs # SSR-307-47 which help to support up to 1,500 lbs. Since your truck has a body lift that actually doesn't change the frame to axle clearance which is why you can use the standard SumoSprings for your application.
Please note that suspension enhancement systems are meant to help support OEM suspension and won't increase the weight capacity of your vehicle. view full answer...
I'm not sure which particular Air LIft Load Lifter system you were referring to, but just like the Firestone Ride Rite # F2597, the Air Lift Load Lifter 5000, part # AL57396 will straddle the location where the factory jounce stop used to sit. The spring would be supported from above and below, attaching to the frame and the axle using the provided plates and hardware. Both air helper spring systems are compatible with your puck system.
Both the Firestone # F2597 and the Air Lift # AL57396... view full answer...
The Firestone Coil-Rite Air Helper Spring Kit # F4118 you mentioned for your 2020 Nissan Pathfinder will not lift your vehicle, but will just provide between 500-1000lbs of load leveling support to fight suspension sag when towing a trailer.
You can fine tune the amount of support by adjusting the helper springs between 5-35 PSI to get the exact support you need.
The # F4118 includes everything needed for the install, but if you would rather not have to manually inflate each bag when... view full answer...
The Air Lift AirLift 1000 Air Helper Springs for Coil Springs part # AL60818 are an excellent option for a 2016 Ram 1500. They are cost effective, easy to install, are adjustable, and provide great support for both towing an hauling. In comparison to the Timbren Rear Suspension Enhancement Systems, they won't have that rough unloaded ride quality and you can adjust the support for any given load.
The only con of the Air Lift AirLift 1000 Air Helper Springs for Coil Spring is the potential... view full answer...
Winches are not designed to hold a load for extended periods of time. Once you have the load lifted into position you would need to use chains or rope to then support the load.
Bulldog Winch # BDW10041 is more than capable of hoisting a 3,000 pound load though so provided you then use another method to support the load this winch is a great option. view full answer...
I recommend Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 # UF48-979002. These scissor jacks are designed to be attached to the frame of your trailer or RV and crank down to stabilize a portion of the trailer's weight.
The jacks have a support weight capacity of 6,500 lbs each. The recent 29'7" models of Sprinter have a Gross Vehicle Weight Rating of 9,200 lbs and these jacks provide a combined support capacity of 13,000 lbs. This stabilizer jack does not have a lift... view full answer...
The Air Lift LoadLifter 5000 Air Helper Springs part # AL57229 are a confirmed fit for a 2016 Nissan Titan XD 2WD. These air springs offer a bolt-on fit without any drilling required. They will provide rear end support for towing or hauling. They can also be adjusted for the perfect mix between support and comfort making them the best choice for the job. They don't require an on-board air compressor for operation but having one will make it much faster to increase or decrease pressure inside... view full answer...
Running more than one suspension enhancement kit can sometimes "work" but the problem is you end up with such a harsh ride quality that it becomes unbearable. For that amount of support you are wanting from your 1995 Dodge Van B3500 the best option is going to be the RAS kit part # RAS4612-DV with a lot of support adjusted in. The RAS kits do the best job giving the support like you are wanting without killing the ride quality. To basically just prevent bottoming out the RAS kit would easily... view full answer...
The overall weight of the Demco Hijacker Autoslide 18k # DM8550034 is 273 lbs. Since the Demco 5th Wheel Lifting Bracket # DM6100 has a capacity of 500 lbs it would easily be able to lift the hitch.
I attached a review video for the hitch and the lifting pin for you to check out as well. view full answer...
I do have some options to help provide support while towing or hauling for a 2012 Ford F-250 with aftermarket lift but all but one of the air bags kit require the jounce stop on the lift block which most aftermarket lift manufactures don't use. Therefore, you are left with the Air Lift Ride Control Air Helper Springs part # AL59556 which have a lower capacity and require drilling into the side of the frame.
I instead recommend the TorkLift StableLoad Rear Suspension Upgrade with Quick-Disconnects... view full answer...
Yes, the Airlift # AL60786 is confirmed as a fit for your 2014 Toyota Sequoia. This air bag kit will improve the sagging that you are experiencing with your Sequoia. This option provides the leveling and support needed for your daily loads, and offers the option for adjustment and improvement of ride quality for when your Sequoia is unloaded.
This kit will support your existing suspension if it is in good working order, but is not designed to be used as a lift kit. Additionally, it will... view full answer...
There are several different types of leveling systems for your 2012 Dodge Ram 1500 but if you are looking for the best then you will want to go with a set of air bags because they let you adjust how much support/comfort that you need for any given load.
That said, I saw that you have already purchased the Air Lift AirLift 1000HD Air Helper Springs part # AL60818HD. These are not what I consider to be the best but will get the job done. The Air Lift AirLift 1000HD Air Helper Springs don't... view full answer...
Go To Results